Difference between revisions of "Decoction Mashing"

From German brewing and more
Jump to: navigation, search
(Further reading.)
 
(15 intermediate revisions by the same user not shown)
Line 1: Line 1:
A '''decoction mash''' is a type of mash in which the various mash temperatures are achieved by removing part of the mash, boiling it in a separate vessel, and then using it as infusion water to heat the remainder of the mash.  It is traditional in many continental European beer styles, especially in Germany and the Czech Republic.
+
{| style="width:800px"
 +
|
  
Decoction mashing is not common among home brewers, since it has a reputation as a time and labor-intensive process.  But a decoction mash is basically just a step infusion mash where some of the grist is heated along with the infusion water.  While it does take some extra time and require some extra stirring, it is a procedure that can be performed by most home brewers.
+
[[Image:Decoction_mashing_mural.jpg|frame|right|Mural on a building at the Weihenstephan brewing school (Germany) showing old time brewing practices including decoction mashing]]
 +
 
 +
A decoction mash is a type of mash in which at least one mash rest temperature is reached by removing part of the mash, boiling it in a separate vessel, and then mixing it back in to raise the temp of the mash.  It is traditional in many continental European beer styles, especially in Germany and the Czech Republic. But most brewries in these regions have switches to the more economical directly heated step infusion mashing.
 +
 
 +
Decoction mashing is not very common among home brewers, since it has a reputation as a time and labor-intensive process.  But a decoction mash is basically just a step infusion mash where some of the grist is heated and returned instead of infusion water.  While it does take some extra time and require some extra stirring, it is a procedure that can be performed by most home brewers.
  
 
==History of the Decoction Mash==
 
==History of the Decoction Mash==
  
Decoction mashing refers to removing a part of the mash, boiling it and returning it to the main mash to increase its temperature to the next rest. This mashing procedure originates from a time when malt quality was not consistent and temperatures could not be measured. The long boiling of the grain makes the starches more accessible for the enzymes. This is particularly important for undermodified malts where the cell walls are not as broken down as they are in well modified or overmodified malts. The boiling of a defined portion of the mash and returning it to the main mash to raise the temperature also helped the consistency in mashing temperatures before thermometers were available.
+
Decoction mashing refers to removing a part of the mash, boiling it and returning it to the main mash to raise the temperature to the next rest. This mashing procedure originates from a time when malt quality was not consistent and temperatures could not be measured. The long boiling of the grain makes the starches more accessible for the enzymes. This is particularly important for undermodified malts where the cell walls are not as broken down as well as they are in well modified or overmodified malts. The boiling of a defined portion of the mash and returning it to the main mash to raise the temperature also helped the consistency in mashing temperatures before thermometers were available.
  
 
==Chemistry of the Decoction Mash==
 
==Chemistry of the Decoction Mash==
Today even most European malts are generally well modified and can be used in infusion step mashes or even single infusion mashes, thus removing the need for decoction mashing. But decoction mashing is still widely used, particularly in German brewing. Many brewers believe that the boiling of the mash gives the beer a flavor profile that cannot be achieved otherwise. But, especially in the home brewing community, there has been debate about the actual benefits of a mash as labor intensive as a decoction mash. Many say that with the malts that are available to the home brewer decoction mashing doesn't make for a difference and if there is a difference it could also be achieved by the use of specialty malts. But in the end every brewer has to determine that for him or herself.
+
 
 +
Today even most European malts are generally well modified and can be used in infusion step mashes or even single infusion mashes, thus removing the need for decoction mashing. But decoction mashing is still widely used, particularly in smaller southern German breweries and for dark beers like Bocks and Dunkels. Many brewers believe that the boiling of the mash gives the beer a flavor profile that cannot be achieved otherwise. But especially in the home brewing community, there has been a hot debate about the actual benefits of a mash as labor intensive as a decoction mash. Many say that with the malts that are available to the home brewer decoction mashing doesn't make for a difference and if there is a difference it could also be achieved by the use of specialty malts. But in the end every brewer has to determine that for him or herself.
  
 
==Decoction Mash Procedure==
 
==Decoction Mash Procedure==
  
The basic procedure for performing a decoction mash is very simple.  Water is added to the grist to reach the initial mash temperature.  One the first temperature rest is complete, a portion of the grain and water is scooped or shoveled out of the mash tun and into the kettle or another heated vessel, where it is brought to a boil.  The portion removed, which can often be as much as a third of the grist, is called the '''decoction'''.
+
The basic procedure for performing a decoction mash is very simple.  Water is added to the grist to reach the initial mash temperature.  Once the first temperature rest is complete, a portion of the grain and water is scooped out of the mash tun and into the kettle or another heated vessel, where it is brought to a boil.  The portion removed, which can often be as much as a third of the grist, is called the '''decoction'''.
  
The decoction may require stirring during heating to avoid scorching the grain; this adds some extra work during the mash.  The decoction step also adds time to the mash, since unlike the infusion water in a step infusion mash, the water cannot be heated during a rest.
+
The decoction may require stirring during heating to avoid scorching the grain; this adds some extra work during the mash.  The decoction step also adds time to the mash process, since a decoction cannot be heated as fast as infusion water and it is usually boiled for 5 – 45 min. After boiling, the decoction is returned to the mash tun to achieve the next temperature rest.
 
+
After boiling, the decoction is returned to the mash tun to achieve the next temperature rest.
+
  
 
==Sample Decoction Mash Schedules==
 
==Sample Decoction Mash Schedules==
Line 26: Line 30:
 
[[Image:Mash_diagram_tripple_decoction.gif]]
 
[[Image:Mash_diagram_tripple_decoction.gif]]
  
The triple decoction is the grand father of all decoction mashes. This is how the first Pilsners were brewed in Pilzen and how many traditional German breweries brew their dark beers, such as Munich Dunkel, Bock, and Doppelbock, to this day.
+
The triple decoction is the grand father of all decoction mashes. This is how the first Pilsners were brewed in Pilzen and how German beer was brewed for a long time and some are still brewed like this.
  
The triple decoction mash employs 3 main mash rests: acid rest, protein rest and saccrification rest. At each of these rests a decoction is used to reach the next rest until the mash-out is reached. The acid rest is a convenient rest to do mash pH adjustments. Not only does it serve to lower the pH by simply using the phosphatase and other acid forming enzymatic activity, but since there is no enzymatic activity that can have a detrimental affect on the final result, there is no rush to move to the next rest.  
+
The triple decoction mash employs 3 main temperature rests: acid rest, protein rest and saccharification rest. At each of these rests a decoction is used to reach the next rest until the mash-out is reached. The acid rest is a convenient rest to do mash pH adjustments. Not only does it serve to lower the pH by simply using the phosphatase and other acid forming enzymatic activity, but since there is no enzymatic activity that can have a detrimental affect on the final result, there is no rush to move to the next rest.  
  
 
There are several formulas out there for calculating the decoction volume. Some of them are simple and others try to account for factors such as the heat capacity of the grains and the mash-tun. The easiest way however is to estimate the decoction volume with a simple formula like this:
 
There are several formulas out there for calculating the decoction volume. Some of them are simple and others try to account for factors such as the heat capacity of the grains and the mash-tun. The easiest way however is to estimate the decoction volume with a simple formula like this:
Line 34: Line 38:
 
<tt>'''decoction volume = total mash volume * (target temp - start temp) / (boil temp - start temp)'''</tt>
 
<tt>'''decoction volume = total mash volume * (target temp - start temp) / (boil temp - start temp)'''</tt>
  
and add about 15 - 20%. The idea is to decoct more mash than necessary. When the decoction is added back to the main mash, it is not all added at once. Instead it is added in steps while the actual temperature of the mash is constantly checked. This requires a thorough mixing of the mash after each addition. Once the target temperature is reached the remaining decoction is left to cool and added once its temperature is close to the mash temperature. By doing so one can account for additional factors that affect the actual needed decoction volume such as: evaporation during the boil, unexpected temperature drop in the main mash and others.
+
and add about 15 - 20%. The idea is to decoct more mash than necessary. When the decoction is added back to the main mash, it is not all added at once. Instead it is added in steps while the temperature of the mash is constantly checked. This requires a thorough mixing of the mash after each addition. Once the target temperature is reached the remaining decoction is left to cool and added once its temperature is close to the mash temperature. By doing so one can account for additional factors that effect the actually needed decoction volume such as: evaporation during the boil, unexpected temperature drop in the main mash and others.
  
The thickness of the decoction depends on the thickness of the main mash. Though it is preferred to leave a lot of the liquid back in the mash tun, the decoction should not be to thick (grain still being submerged in liquid) to make stirring it easier and keep it from scorching easily. If the main mash can be kept at the preferred thickness of 1.5 - 2 qts/lb (3-4 kg/l) the decoction should have a thickness of 1-1.25 qts/lb (2-2.5 kg/l) this is about the thickness of a standard single infusion mash. At this thickness and with gentle heating, only little stirring is necessary to keep the mash from scorching. For lager grists (high gravity beers) the thickness of the mash may however be limited by the volume of the mash tun.
+
The thickness of the decoction depends on the thickness of the main mash. Though it is preferred to leave a lot of the liquid back in the mash tun, the decoction should not be too thick (grain should still be submerged in liquid) to make stirring it easier and keep it from scorching easily. If the main mash can be kept at the preferred thickness of 1.5 - 2 qts/lb (3-4 kg/l) the decoction should have a thickness of 1-1.25 qts/lb (2-2.5 kg/l). At this thickness and with gentle heating, only little stirring is necessary to keep the mash from scorching. For lager grists (high gravity beers) the thickness of the mash may however be limited by the volume of the mash tun.
  
All the decoction schedules provided here assume a decoction rise temp of 2-4 *F/min (1-2 *C/min). This is what is generally recommended in the literature for heating the mash. There is also a saccrification rest at 155 - 162 *F (68 - 72 *C). The purpose of this rest is to utilize the enzymatic power of the decoction before its enzymes are destroyed by further heating. This is particularly important when brewing beers with a large percentage of the enzymatic weaker dark base malts. This rest doesn't have to be held at the main saccrification temperature. It is sufficient to rest in the alpha amylase range where the conversion is also done much quicker. After the decoction is converted or almost converted (iodine test) the heating of the mash is resumed. To hold this rest the pot can be taken off the burner and wrapped in blankets for insulation.  
+
All the decoction schedules provided here assume a decoction rise temp of 2-4 *F/min (1-2 *C/min). This is what is generally recommended in the literature for heating the mash. In technical brewing this is a result of the decoction kettle design which cannot heat the mash any faster. There is also a saccharification rest at 155 - 162 *F (68 - 72 *C). The purpose of this rest is to utilize the enzymatic power of the decoction before its enzymes are destroyed by further heating. This is particularly important when brewing beers with a large percentage of the enzymatic weaker dark base malts. This rest doesn't have to be held at the main saccharification temperature. It is sufficient to rest in the alpha amylase range where the conversion is also done much quicker. After the decoction is converted or almost converted (iodine test) the heating of the mash is resumed. To hold this rest the pot can be taken off the burner and wrapped in blankets for insulation.  
  
The decoction is then boiled for 10 - 40 minutes. Shorter boil times for light colored beers, longer boil times for dark colored beers. If only gentle heat is applied during the boil, stirring should only be necessary occasionally. Similar to wort boiling, excessive thermal loading of the decoction can result in a burnt flavor of the beer. If the decoction is boiled for an extended amount of time evaporation losses can be compensated with the addition of water (which can also be added after the decoction has been pulled, where it helps in tinning it out and makes it more manageable.
+
The decoction is then boiled for 10 - 40 minutes. Shorter boil times for light colored beers, longer boil times for dark colored beers. If only gentle heat is applied during the boil, stirring should only be necessary occasionally. Similar to wort boiling, excessive thermal loading of the decoction can result in a burnt flavor of the beer. If the decoction is boiled for an extended amount of time evaporation losses can be compensated with the addition of water (which can also be added after the decoction has been pulled, where it helps in tinning it out and makes it more manageable) or by boiling with the lid on. Any trapped DMS will be boiled off during the wort boil anyway.
  
Once the decoction is then added to the main mash to reach the protein rest. The rest temperature and time before pulling the next decoction should be based on the malt that is used. Less modified malts benefit from a rest closer to 122 *F (50 *C) which produces more amino acids, which is an essential yeast nutrient. In undermodified malts the protein conversion has not been driven far enough to allow for sufficient wort FAN (free amino nitrogen) without the use of a more intensive protein rest. If the malt is a well modified modern continental malt, the protein rest temperature should be kept closer to 133 *F (55 *C) and the next decoction should be pulled 5 - 10 minutes after the rest temperature has been reached. This serves to protect more of the medium chained proteins that are important for body and head retention. Decoction that allows for a shorter protein rest in general will be described later.
+
The decoction is then added to the main mash to reach the protein rest. The rest temperature and time before pulling the next decoction should be based on the malt that is used. Less modified malts benefit from a rest closer to 122 *F (50 *C) which produces more amino acids, which is an essential yeast nutrient. In undermodified malts the protein conversion has not been driven far enough during malting to allow for sufficient wort FAN (free amino nitrogen) without the use of a more intensive protein rest. If the malt is a well modified modern malt, the protein rest temperature should be kept closer to 133 *F (55 *C) and the next decoction should be pulled 5 - 10 minutes after the rest temperature has been reached. This serves to protect more of the medium chained proteins that are important for body and head retention. Decoction schedules that allows for a shorter protein rest in general will be described later.
  
A decoction is pulled again, rested for conversion and then brought to a boil. This time to reach the saccrification rest temperature. This temperature is similar to the saccrification rest temperature that is used for a single infusion mash, but the same temperature that was used in a single infusion mash may not give the same fermentability in a decoction mash. Boiling has destroyed more of the enzymes while it has made the starch also more easily accessible. The former would lead to a less fermentable result while the latter would shift the fermentability towards a more fermentable wort. This is only to illustrate that experimenting with the saccrification rest temperature might be necessary for the optimal result. The saccrification rest temperature that would have been used in a single infusion mash is however a good starting point.
+
A decoction is pulled again, rested for conversion and then brought to a boil. This time to reach the saccharification rest temperature. This temperature is similar to the saccharification rest temperature that is used for a single infusion mash, but the same temperature that was used in a single infusion mash may not give the same fermentability in a decoction mash. Boiling has destroyed more of the enzymes while it has made the starch also more easily accessible. The former would lead to a less fermentable result while the latter would shift the fermentability towards a more fermentable wort. This is only to illustrate that experimenting with the saccharification rest temperature might be necessary for optimal results. The saccharification rest temperature that would have been used in a single infusion mash is however a good starting point.
  
After holding the saccrification rest for about 45 min or longer if starch conversion is not complete after that time, the final decoction is pulled. This decoction can also be thinner and doesn't have to be rested for starch conversion any more, since the starches have already been converted and any enzymes remaining in the main mash will be denatured by the higher temperatures of the final step.
+
After holding the saccharification rest for about 45 min or longer, if starch conversion is not complete after that time, the final decoction is pulled. This decoction can also be thinner and doesn't have to be rested for starch conversion any more, since the starches have already been converted and enzymes protection is not as crucial anymore.
  
 
===Single Decoction===
 
===Single Decoction===
 
[[Image:Mash_diagram_single_decoction.gif]]
 
[[Image:Mash_diagram_single_decoction.gif]]
  
In a single decoction mash only one decoction is used. This decoction can be used to reach any rest, but most commonly it is used to get to mash-out. This can be a simple enhancement of a single infusion or step mash.  
+
In a single decoction mash only one decoction is used. This decoction can be used to reach any rest, but most commonly it is used to reach the mash-out temperature. This can be a simple enhancement of a single infusion or step mash.  
  
The mash schedule shown above is well suited for European and continental lager malts. It features a short protein rest at the higher end of the temperature range for proteolytic activity, a single temperature saccrification rest and a decoction to get to mash-out. Calculate your strike water to aim for a protein rest between 53 and 55 *C (129 - 133 *F) at a mash consistency of about 2.5 l/kg (1.2 qts/lb). This will put emphasis on the protein degrading enzymes that produce the medium chained proteins which are good for head retention and mouth feel. The well-modified modern malts already have enough short proteins (amino acids) and a rest closer to 50 *C (122 *F) is not necessary. Dough-in and check the temperature. Plan on holding this temperature for 20 min. During this time bring about half of the amount of water, that was used for dough-in, to a boil. The pH of the mash should be checked and corrected if it is not within the 5.2 - 5.5 range. When the protein rest is over, use a heat resistant vessel to scoop the boiling water into the mash. This is best done by holding the thermometer in the mash with one hand and scooping the water or stirring with the other hand. It is important to stir the mash well to even out its temperature. Add water until the desired mash temp of 65 - 68 *C (148 - 155 *F) is reached. You will notice that the tinning mash makes stirring easier. The resulting mash will have a consistency of about 3.5 - 3.75 l/kg (1.8 qts/lb) which is great for German style beers. Hold this rest for 45 min.  
+
The mash schedule shown above is well suited for European and continental lager malts. It features a short protein rest at the higher end of the temperature range for proteolytic activity, a single temperature saccharification rest and a decoction to get to mash-out. Calculate your strike water to aim for a protein rest between 53 and 55 *C (129 - 133 *F) at a mash consistency of about 2.5 l/kg (1.2 qts/lb). This temperature puts emphasis on the protein degrading enzymes that produce the medium chained proteins which are good for head retention and mouth feel. The well-modified modern malts already have enough short proteins (amino acids) and a rest closer to 50 *C (122 *F) is not necessary. Dough-in and check the temperature. Plan on holding this temperature for 20 min. During this time bring about half of the amount of water, that was used for dough-in, to a boil. The pH of the mash should be checked and corrected if it is not within the 5.3 - 5.6 range. When the protein rest is over, use a heat resistant vessel to scoop the boiling water into the mash. This is best done by holding the thermometer in the mash with one hand and scooping the water or stirring with the other hand. It is important to stir the mash well to even out its temperature. Add water until the desired mash temp of 65 - 68 *C (148 - 155 *F) is reached. You will notice that the thinned mash makes stirring easier. This mash will have a consistency of about 3.5 - 4 l/kg (1.7 - 2.0 qts/lb) which is typical for German style beers. Hold this rest for 45 min.  
  
Check for conversion. Calculate the amount of decoction necessary to get to the mash-out temperature of 74 - 76 *C (165 - 170 *F) and pull this decoction. In order to prevent scorching get good mix of liquid and grains. This decoction should be brought to a boil over the next 10 to 15 minutes. A gentle flame while keeping the pot covered will prevent scorching even without the need of constant stirring. When the decoction comes to a boil remove the lid (watch out for boil-overs) and let it boil for 10 - 30 min. Shorter for light worts and longer for darker worts.
+
Check for conversion. Calculate the amount of decoction necessary to get to the mash-out temperature of 74 - 76 *C (165 - 170 *F) and pull this decoction. In order to prevent scorching get good mix of liquid and grains. This decoction should be brought to a boil over the next 10 to 15 minutes. A gentle flame while keeping the pot covered will prevent scorching even without the need of constant stirring. Boil for 10 - 30 min. Shorter for light worts and longer for darker worts.
  
 
===Double Decoction===
 
===Double Decoction===
Line 62: Line 66:
 
[[Image:Mash_diagram_double_decoction_classic.gif]]
 
[[Image:Mash_diagram_double_decoction_classic.gif]]
  
The classic version of the double decoction is a shortened tripple decoction. It omits the acid rest and starts with the protein rest. Because of this only 2 deooctions are needed to get to mash-out. One to get from the protein rest to the saccrification rest and another one to get from the saccrification rest to mash-out. Like the tripple decoction, this mash rests the main mash at the protein rest for a long time. With well modified lager malts, this may result in overly extensive protein degradation. The following two sections show mash schedules that avoid this problem.
+
The classic version of the double decoction is a shortened triple decoction. It omits the acid rest and starts with the protein rest. Because of this only 2 decoctions are needed to get to mash-out. One to get from the protein rest to the saccharification rest and another one to get from the saccharification rest to mash-out. Like the triple decoction, this mash rests the main mash at the protein rest for a long time. With well modified lager malts, this may result in overly extensive protein degradation. The following two sections show mash schedules that avoid this problem.
  
 
====Enhanced Double Decoction====
 
====Enhanced Double Decoction====
Line 68: Line 72:
 
[[Image:Mash_diagram_double_decoction_enhanced.gif]]
 
[[Image:Mash_diagram_double_decoction_enhanced.gif]]
  
This is a mash schedule that was taken from German brewing literaure [Narziss,2005]. The great thing about this mash is that it is almost as intensive as a triple decoction, when it comes to the amount of mash that is boiled, but a little bit shorter and without a long protein rest. The basic idea of this mash is to pull a decoction that is large enough to get the mash from acid rest directly to the saccrification rest. But when this decoction is returned to the main mash, it is returned in 2 parts: first to reach the protein rest and later to reach the saccrification rest. The second decoction is done to reach mash-out.
+
This is a mash schedule that was taken from German brewing literature [Narziss,2005]. The great thing about this mash is that it is almost as intensive as a triple decoction, when it comes to the amount of mash that is boiled, but a little bit shorter and without a long protein rest. The basic idea of this mash is to pull a decoction that is large enough to get the mash from acid rest directly to the saccharification rest. But when this decoction is returned to the main mash, it is returned in 2 parts: first to reach the protein rest and later to reach the saccharification rest. The second decoction is done to reach mash-out.
  
This mash starts like the triple decoction. Dough-in is done to reach the acid rest where the mash pH is corrected if necessary. Now a large decoction (about 50 - 60% of the mash) is pulled and heated. It is advisable to add some water 5-10% of the decoction volume to compensate for boil-off and thin it out a little. Due to the size of the decoction it should be rested for protein rest and must be rested for the saccrification rest. The saccrification rest is necessary to get the most out of the enzymes in this mash as they will be destroyed once the decoction is brought to a boil. This rest can be done at 155 - 162 *F (68 - 72 *C) where the conversion should only take 15 - 20 min. Taking the pot off the burner, closing it with a lid and wrapping it in blankets for insulation works very well. Check temperature and conversion after 15 min. When fully or almost converted, return the pot to the burner and start heating it gently again to bring it to a boil. Watch out for the foam-up of the decoction shortly after it comes to a boil.  
+
This mash starts like the triple decoction. Dough-in is done to reach the acid rest where the mash pH is corrected if necessary. Now a large decoction (about 50 - 60% of the mash) is pulled and heated. It is advisable to add some water 5-10% of the decoction volume to compensate for boil-off and thin it out a little. Due to the size of the decoction it may be rested for protein rest and must be rested for the saccharification rest. The saccharification rest is necessary to get the most out of the enzymes in this mash as they will be destroyed once the decoction is brought to a boil. It also reduces the viscosity of the mash which mitigates the risk of scorching it later. This rest can be done at 155 - 162 *F (68 - 72 *C) where the conversion should only take 15 - 20 min. Taking the pot off the burner, closing it with a lid and wrapping it in blankets for insulation works very well. Check temperature and conversion after 15 min. When fully or almost converted, return the pot to the burner and start heating it gently again to bring it to a boil. Watch out for the foam-up of the decoction shortly before and after it comes to a boil.  
  
The mash is now boiled from 10 - 30 min. After that a heat resistant vessel is used to scoop some of the decoction back into the main mash. Stir well and check the temperature of the main mash. Continue adding the decoction until the desired protein rest temperature is reached. After that the main mash is rested for 15 - 20 min while the rest of the decoction is still boiling. Once the protein rest is over, continue adding the decoction, stir and check temperature until the desired saccrification rest temperature is reached. Hopefully enough decoction was pulled to reach this rest. If some decoction is left over once the rest temperature is reached, let it cool and add it when its temperature is close to the temperature of the main mash.
+
The mash is now boiled from 10 - 30 min. After that a heat resistant vessel is used to scoop some of the decoction back into the main mash. Stir well and check the temperature of the main mash. Continue adding the decoction and mixing until the desired protein rest temperature is reached. After that the main mash is rested for 15 - 20 min while the rest of the decoction is still boiling. Once the protein rest is over, continue adding the decoction, stir and check temperature until the desired saccharification rest temperature is reached. Hopefully enough decoction was pulled to reach this rest. If some decoction is left over once the rest temperature is reached, let it cool and add it when its temperature is close to the temperature of the main mash.
  
Rest the mash for saccrification. Check for conversion and when the desired mash time rest time is up and conversion was achieved, pull the 2nd decoction. Heat it to boiling, boil for 5-20 min and return it to the main mash to reach mash-out.
+
Rest the mash for saccharification. Check for conversion and when the desired mash time rest time is up and conversion was achieved, pull the 2nd decoction. Heat it to boiling, boil for 5-20 min and return it to the main mash to reach mash-out.
 +
 
 +
=====Variation=====
 +
 
 +
If you want a highly fermentable wort and truly boil and convert almost all of the starches in the decoction, this variation should get you there:
 +
 
 +
Dough-in in at the acid rest in your your boil kettle. Stir well to make sure you are dissolving the enzymes into the mash water. While the mash is resting, preheat your mash tun with some boiling water. This will prevent a significant temperature drop later.
 +
 
 +
After the mash has been resting for 10 - 20 min and the pH is corrected, remove the top 40% of the mash (mostly liquid) and place it into the mash-tun. This contains the enzymes that will be needed for the saccharification rest. The kettle should contain a thick decoction that is similar to the one that a brewery would get when they pump the decoction from the bottom of the mash tun into their boil kettle. Heat, convert and boil the decoction. After that return a part of it to the mash tun for a protein rest (can be skipped) and the rest later later for a saccharification rest.
 +
 
 +
Note that the start of the saccharification rest has now more glucose chain ends available compared to a conventional decoction mash or infusion mash since almost all of the starch was converted in the decoction. This will provide lots of opportunity for the beta amylase to create maltose. If you want to have wort of normal fermentability you should hold this rest closer to 160F where the beta amylase denatures more quickly. But if you want a very fermentable wort, hold this rest closer to 140F where the b-amylase will be active for much longer.
 +
 
 +
Use a 2nd decoction to get to mash-out.
  
 
====Hochkurz Double Decoction====
 
====Hochkurz Double Decoction====
 
[[Image:Mash_diagram_double_decoction_hochkurz.gif]]
 
[[Image:Mash_diagram_double_decoction_hochkurz.gif]]
  
This version of a double decoction mash is known as Hochkurz Mash in German brewing [Narziss, 2005]. It uses a 2 temperature saccrification rest. The first decoction is used to get from the 1st saccrification rest (maltose rest) to the 2nd saccrification rest (dextrinization rest) and the 2nd decoction is used for mash-out. The dough-in can happen with the protein rest or the maltose rest.
+
This version of a double decoction mash is known as ''Hochkurz'' Mash in German brewing [Narziss, 2005]. It uses a 2 temperature saccharification rest. The first decoction is used to get from the 1st saccharification rest (maltose rest) to the 2nd saccharification rest (dextrinization rest) and the 2nd decoction is used for mash-out. The dough-in can happen with the protein rest, an intermediate rest or the maltose rest. ''Hochkurz'' refers to the fact that these mashes dough in high (''hoch'') and are short (''kurz'').
  
To optimize the use of the beta amylase and produce a wort with high levels of maltose, German brewers often use a 2 step saccrification scheme. The first rest, usually held at 140 - 146 *F (60 - 63 *C) gives the beta amylase time to break down the glucose chains. There is already sufficient alpha amylase activity to provide enough glucose chain ends (needed because the beta amylase can only clip maltose from the end of a glucose chain) for the beta amylase. Due to the lower temperature, the beta amylase will also be actve for a longer time as it would in a single saccrification rest that is held at higher temperatures. To produce some dextrines and ensure that all starch has been converted, a dextrinisation rest is held at 158 - 162 *F (70 - 72 *C). At this temperature the beta amylase is quickly deactivated and only the alpha amylase works on the starches. The rest is held until the mash is iodine negative (converted).
+
To optimize the use of the beta amylase and produce a wort with high levels of maltose, German brewers often use a 2 step saccharification scheme. With today's well modified malts the protein rest is generally sipped. The first rest, usually held at 140 - 146 *F (60 - 63 *C) gives the beta amylase time to convert the glucose chains (large dextrins) into maltose. At this temperature there is already sufficient alpha amylase activity available to provide enough glucose chain ends for the beta amylase. This is needed because the beta amylase can only clip maltose from the non reducing end of a glucose chain. Due to the lower temperature, the beta amylase will be active for a longer time as it would in a single saccharification rest held at higher temperatures. To reduce and eventually terminate the beta amylase activity and to ensure that all starch in the wort has been converted (especially the small starch granules which have a higher gelatinization temperature), a dextrinization rest is held at 158 - 162 *F (70 - 72 *C). At this temperature the beta amylase is quickly deactivated and only the alpha amylase works on the starches. The rest is held until the mash is iodine negative (no starch or long dextrines in the wort). Narziss [Narziss, 2005] and Fix [Fix, 1999] suggest, that a rest at 158 - 162 *F (70 - 72 *C) benefits head retention and body of the beer though glycoproteides that are extracted from the malt but not degraded by enzymatic activity. Because of that Narziss suggests holding this rest up to 60 min. After that rest a mash-out is performed at 167-173F (75-78 C). The temperature should not be higher as this would deactivate all the alpha amylase activity and some alpha amylase activity is still needed during lautering to convert any rouge starches, that might be liberated during sparging, on their way to the kettle.
  
The length as well as the temperature of the maltose rest determine the fermetability of the wort. Shorter rests and/or higher temperatures will result in a less fermentable wort as the beta amylase gets less time for maltose production.
+
The length as well as the temperature of the maltose rest determines the fermentability of the wort. Shorter rests and/or higher temperatures will result in a less fermentable wort as the beta amylase gets less time for maltose production.
  
The steps for the water infusions and decoctions necessary for this mash have already been covered with the other mash schedule examples.
+
The steps for the water infusions and decoctions necessary for this mash have already been covered with the other mash schedule examples. This mash schedule can also be done w/o the use of decoctions through hot water infusions or direct heat to the mash. The latter has become standard practice in most German breweries.
 +
 
 +
=Videos=
 +
 
 +
There is a 3 part video series on YouTube that demonstrates decoction mashing using the enhanced double decoction:
 +
 
 +
[http://www.youtube.com/watch?v=_V1zt0mW084 Part 1] - [http://www.youtube.com/watch?v=I5u_nJhMD4w Part 2] - [http://www.youtube.com/watch?v=6VcZRVw2k_o Part 3]
 +
 
 +
This was the initial transcript for the videos. I ended up omitting some of it: [[Decoction Mashing Video - Transcript]]
  
 
=Sources=
 
=Sources=
 
:[Narziss, 2005] Prof. Dr. agr. Ludwig  Narziss, Prof. Dr.-Ing. habil. Werner Back, Technische Universitaet Muenchen (Fakultaet fuer Brauwesen, Weihenstephan), ''Abriss der Bierbrauerei''. WILEY-VCH Verlags GmbH Weinheim Germany, 2005
 
:[Narziss, 2005] Prof. Dr. agr. Ludwig  Narziss, Prof. Dr.-Ing. habil. Werner Back, Technische Universitaet Muenchen (Fakultaet fuer Brauwesen, Weihenstephan), ''Abriss der Bierbrauerei''. WILEY-VCH Verlags GmbH Weinheim Germany, 2005
 +
:[Fix, 1999] George J. Fix Ph.D, ''Principles of Brewing Science'', Brewers Publications, Boulder CO, 1999
 +
 +
|}

Latest revision as of 02:00, 2 August 2009

Mural on a building at the Weihenstephan brewing school (Germany) showing old time brewing practices including decoction mashing

A decoction mash is a type of mash in which at least one mash rest temperature is reached by removing part of the mash, boiling it in a separate vessel, and then mixing it back in to raise the temp of the mash. It is traditional in many continental European beer styles, especially in Germany and the Czech Republic. But most brewries in these regions have switches to the more economical directly heated step infusion mashing.

Decoction mashing is not very common among home brewers, since it has a reputation as a time and labor-intensive process. But a decoction mash is basically just a step infusion mash where some of the grist is heated and returned instead of infusion water. While it does take some extra time and require some extra stirring, it is a procedure that can be performed by most home brewers.

History of the Decoction Mash

Decoction mashing refers to removing a part of the mash, boiling it and returning it to the main mash to raise the temperature to the next rest. This mashing procedure originates from a time when malt quality was not consistent and temperatures could not be measured. The long boiling of the grain makes the starches more accessible for the enzymes. This is particularly important for undermodified malts where the cell walls are not as broken down as well as they are in well modified or overmodified malts. The boiling of a defined portion of the mash and returning it to the main mash to raise the temperature also helped the consistency in mashing temperatures before thermometers were available.

Chemistry of the Decoction Mash

Today even most European malts are generally well modified and can be used in infusion step mashes or even single infusion mashes, thus removing the need for decoction mashing. But decoction mashing is still widely used, particularly in smaller southern German breweries and for dark beers like Bocks and Dunkels. Many brewers believe that the boiling of the mash gives the beer a flavor profile that cannot be achieved otherwise. But especially in the home brewing community, there has been a hot debate about the actual benefits of a mash as labor intensive as a decoction mash. Many say that with the malts that are available to the home brewer decoction mashing doesn't make for a difference and if there is a difference it could also be achieved by the use of specialty malts. But in the end every brewer has to determine that for him or herself.

Decoction Mash Procedure

The basic procedure for performing a decoction mash is very simple. Water is added to the grist to reach the initial mash temperature. Once the first temperature rest is complete, a portion of the grain and water is scooped out of the mash tun and into the kettle or another heated vessel, where it is brought to a boil. The portion removed, which can often be as much as a third of the grist, is called the decoction.

The decoction may require stirring during heating to avoid scorching the grain; this adds some extra work during the mash. The decoction step also adds time to the mash process, since a decoction cannot be heated as fast as infusion water and it is usually boiled for 5 – 45 min. After boiling, the decoction is returned to the mash tun to achieve the next temperature rest.

Sample Decoction Mash Schedules

This section contains discussions of a number of sample schedules for decoction mashes, including single, double, and triple decoctions. The brewer should bear in mind that some mash schedules are better suited for use with modern, well-modified European malts than others.

Triple Decoction

Mash diagram tripple decoction.gif

The triple decoction is the grand father of all decoction mashes. This is how the first Pilsners were brewed in Pilzen and how German beer was brewed for a long time and some are still brewed like this.

The triple decoction mash employs 3 main temperature rests: acid rest, protein rest and saccharification rest. At each of these rests a decoction is used to reach the next rest until the mash-out is reached. The acid rest is a convenient rest to do mash pH adjustments. Not only does it serve to lower the pH by simply using the phosphatase and other acid forming enzymatic activity, but since there is no enzymatic activity that can have a detrimental affect on the final result, there is no rush to move to the next rest.

There are several formulas out there for calculating the decoction volume. Some of them are simple and others try to account for factors such as the heat capacity of the grains and the mash-tun. The easiest way however is to estimate the decoction volume with a simple formula like this:

decoction volume = total mash volume * (target temp - start temp) / (boil temp - start temp)

and add about 15 - 20%. The idea is to decoct more mash than necessary. When the decoction is added back to the main mash, it is not all added at once. Instead it is added in steps while the temperature of the mash is constantly checked. This requires a thorough mixing of the mash after each addition. Once the target temperature is reached the remaining decoction is left to cool and added once its temperature is close to the mash temperature. By doing so one can account for additional factors that effect the actually needed decoction volume such as: evaporation during the boil, unexpected temperature drop in the main mash and others.

The thickness of the decoction depends on the thickness of the main mash. Though it is preferred to leave a lot of the liquid back in the mash tun, the decoction should not be too thick (grain should still be submerged in liquid) to make stirring it easier and keep it from scorching easily. If the main mash can be kept at the preferred thickness of 1.5 - 2 qts/lb (3-4 kg/l) the decoction should have a thickness of 1-1.25 qts/lb (2-2.5 kg/l). At this thickness and with gentle heating, only little stirring is necessary to keep the mash from scorching. For lager grists (high gravity beers) the thickness of the mash may however be limited by the volume of the mash tun.

All the decoction schedules provided here assume a decoction rise temp of 2-4 *F/min (1-2 *C/min). This is what is generally recommended in the literature for heating the mash. In technical brewing this is a result of the decoction kettle design which cannot heat the mash any faster. There is also a saccharification rest at 155 - 162 *F (68 - 72 *C). The purpose of this rest is to utilize the enzymatic power of the decoction before its enzymes are destroyed by further heating. This is particularly important when brewing beers with a large percentage of the enzymatic weaker dark base malts. This rest doesn't have to be held at the main saccharification temperature. It is sufficient to rest in the alpha amylase range where the conversion is also done much quicker. After the decoction is converted or almost converted (iodine test) the heating of the mash is resumed. To hold this rest the pot can be taken off the burner and wrapped in blankets for insulation.

The decoction is then boiled for 10 - 40 minutes. Shorter boil times for light colored beers, longer boil times for dark colored beers. If only gentle heat is applied during the boil, stirring should only be necessary occasionally. Similar to wort boiling, excessive thermal loading of the decoction can result in a burnt flavor of the beer. If the decoction is boiled for an extended amount of time evaporation losses can be compensated with the addition of water (which can also be added after the decoction has been pulled, where it helps in tinning it out and makes it more manageable) or by boiling with the lid on. Any trapped DMS will be boiled off during the wort boil anyway.

The decoction is then added to the main mash to reach the protein rest. The rest temperature and time before pulling the next decoction should be based on the malt that is used. Less modified malts benefit from a rest closer to 122 *F (50 *C) which produces more amino acids, which is an essential yeast nutrient. In undermodified malts the protein conversion has not been driven far enough during malting to allow for sufficient wort FAN (free amino nitrogen) without the use of a more intensive protein rest. If the malt is a well modified modern malt, the protein rest temperature should be kept closer to 133 *F (55 *C) and the next decoction should be pulled 5 - 10 minutes after the rest temperature has been reached. This serves to protect more of the medium chained proteins that are important for body and head retention. Decoction schedules that allows for a shorter protein rest in general will be described later.

A decoction is pulled again, rested for conversion and then brought to a boil. This time to reach the saccharification rest temperature. This temperature is similar to the saccharification rest temperature that is used for a single infusion mash, but the same temperature that was used in a single infusion mash may not give the same fermentability in a decoction mash. Boiling has destroyed more of the enzymes while it has made the starch also more easily accessible. The former would lead to a less fermentable result while the latter would shift the fermentability towards a more fermentable wort. This is only to illustrate that experimenting with the saccharification rest temperature might be necessary for optimal results. The saccharification rest temperature that would have been used in a single infusion mash is however a good starting point.

After holding the saccharification rest for about 45 min or longer, if starch conversion is not complete after that time, the final decoction is pulled. This decoction can also be thinner and doesn't have to be rested for starch conversion any more, since the starches have already been converted and enzymes protection is not as crucial anymore.

Single Decoction

Mash diagram single decoction.gif

In a single decoction mash only one decoction is used. This decoction can be used to reach any rest, but most commonly it is used to reach the mash-out temperature. This can be a simple enhancement of a single infusion or step mash.

The mash schedule shown above is well suited for European and continental lager malts. It features a short protein rest at the higher end of the temperature range for proteolytic activity, a single temperature saccharification rest and a decoction to get to mash-out. Calculate your strike water to aim for a protein rest between 53 and 55 *C (129 - 133 *F) at a mash consistency of about 2.5 l/kg (1.2 qts/lb). This temperature puts emphasis on the protein degrading enzymes that produce the medium chained proteins which are good for head retention and mouth feel. The well-modified modern malts already have enough short proteins (amino acids) and a rest closer to 50 *C (122 *F) is not necessary. Dough-in and check the temperature. Plan on holding this temperature for 20 min. During this time bring about half of the amount of water, that was used for dough-in, to a boil. The pH of the mash should be checked and corrected if it is not within the 5.3 - 5.6 range. When the protein rest is over, use a heat resistant vessel to scoop the boiling water into the mash. This is best done by holding the thermometer in the mash with one hand and scooping the water or stirring with the other hand. It is important to stir the mash well to even out its temperature. Add water until the desired mash temp of 65 - 68 *C (148 - 155 *F) is reached. You will notice that the thinned mash makes stirring easier. This mash will have a consistency of about 3.5 - 4 l/kg (1.7 - 2.0 qts/lb) which is typical for German style beers. Hold this rest for 45 min.

Check for conversion. Calculate the amount of decoction necessary to get to the mash-out temperature of 74 - 76 *C (165 - 170 *F) and pull this decoction. In order to prevent scorching get good mix of liquid and grains. This decoction should be brought to a boil over the next 10 to 15 minutes. A gentle flame while keeping the pot covered will prevent scorching even without the need of constant stirring. Boil for 10 - 30 min. Shorter for light worts and longer for darker worts.

Double Decoction

Classic Double Decoction

Mash diagram double decoction classic.gif

The classic version of the double decoction is a shortened triple decoction. It omits the acid rest and starts with the protein rest. Because of this only 2 decoctions are needed to get to mash-out. One to get from the protein rest to the saccharification rest and another one to get from the saccharification rest to mash-out. Like the triple decoction, this mash rests the main mash at the protein rest for a long time. With well modified lager malts, this may result in overly extensive protein degradation. The following two sections show mash schedules that avoid this problem.

Enhanced Double Decoction

Mash diagram double decoction enhanced.gif

This is a mash schedule that was taken from German brewing literature [Narziss,2005]. The great thing about this mash is that it is almost as intensive as a triple decoction, when it comes to the amount of mash that is boiled, but a little bit shorter and without a long protein rest. The basic idea of this mash is to pull a decoction that is large enough to get the mash from acid rest directly to the saccharification rest. But when this decoction is returned to the main mash, it is returned in 2 parts: first to reach the protein rest and later to reach the saccharification rest. The second decoction is done to reach mash-out.

This mash starts like the triple decoction. Dough-in is done to reach the acid rest where the mash pH is corrected if necessary. Now a large decoction (about 50 - 60% of the mash) is pulled and heated. It is advisable to add some water 5-10% of the decoction volume to compensate for boil-off and thin it out a little. Due to the size of the decoction it may be rested for protein rest and must be rested for the saccharification rest. The saccharification rest is necessary to get the most out of the enzymes in this mash as they will be destroyed once the decoction is brought to a boil. It also reduces the viscosity of the mash which mitigates the risk of scorching it later. This rest can be done at 155 - 162 *F (68 - 72 *C) where the conversion should only take 15 - 20 min. Taking the pot off the burner, closing it with a lid and wrapping it in blankets for insulation works very well. Check temperature and conversion after 15 min. When fully or almost converted, return the pot to the burner and start heating it gently again to bring it to a boil. Watch out for the foam-up of the decoction shortly before and after it comes to a boil.

The mash is now boiled from 10 - 30 min. After that a heat resistant vessel is used to scoop some of the decoction back into the main mash. Stir well and check the temperature of the main mash. Continue adding the decoction and mixing until the desired protein rest temperature is reached. After that the main mash is rested for 15 - 20 min while the rest of the decoction is still boiling. Once the protein rest is over, continue adding the decoction, stir and check temperature until the desired saccharification rest temperature is reached. Hopefully enough decoction was pulled to reach this rest. If some decoction is left over once the rest temperature is reached, let it cool and add it when its temperature is close to the temperature of the main mash.

Rest the mash for saccharification. Check for conversion and when the desired mash time rest time is up and conversion was achieved, pull the 2nd decoction. Heat it to boiling, boil for 5-20 min and return it to the main mash to reach mash-out.

Variation

If you want a highly fermentable wort and truly boil and convert almost all of the starches in the decoction, this variation should get you there:

Dough-in in at the acid rest in your your boil kettle. Stir well to make sure you are dissolving the enzymes into the mash water. While the mash is resting, preheat your mash tun with some boiling water. This will prevent a significant temperature drop later.

After the mash has been resting for 10 - 20 min and the pH is corrected, remove the top 40% of the mash (mostly liquid) and place it into the mash-tun. This contains the enzymes that will be needed for the saccharification rest. The kettle should contain a thick decoction that is similar to the one that a brewery would get when they pump the decoction from the bottom of the mash tun into their boil kettle. Heat, convert and boil the decoction. After that return a part of it to the mash tun for a protein rest (can be skipped) and the rest later later for a saccharification rest.

Note that the start of the saccharification rest has now more glucose chain ends available compared to a conventional decoction mash or infusion mash since almost all of the starch was converted in the decoction. This will provide lots of opportunity for the beta amylase to create maltose. If you want to have wort of normal fermentability you should hold this rest closer to 160F where the beta amylase denatures more quickly. But if you want a very fermentable wort, hold this rest closer to 140F where the b-amylase will be active for much longer.

Use a 2nd decoction to get to mash-out.

Hochkurz Double Decoction

Mash diagram double decoction hochkurz.gif

This version of a double decoction mash is known as Hochkurz Mash in German brewing [Narziss, 2005]. It uses a 2 temperature saccharification rest. The first decoction is used to get from the 1st saccharification rest (maltose rest) to the 2nd saccharification rest (dextrinization rest) and the 2nd decoction is used for mash-out. The dough-in can happen with the protein rest, an intermediate rest or the maltose rest. Hochkurz refers to the fact that these mashes dough in high (hoch) and are short (kurz).

To optimize the use of the beta amylase and produce a wort with high levels of maltose, German brewers often use a 2 step saccharification scheme. With today's well modified malts the protein rest is generally sipped. The first rest, usually held at 140 - 146 *F (60 - 63 *C) gives the beta amylase time to convert the glucose chains (large dextrins) into maltose. At this temperature there is already sufficient alpha amylase activity available to provide enough glucose chain ends for the beta amylase. This is needed because the beta amylase can only clip maltose from the non reducing end of a glucose chain. Due to the lower temperature, the beta amylase will be active for a longer time as it would in a single saccharification rest held at higher temperatures. To reduce and eventually terminate the beta amylase activity and to ensure that all starch in the wort has been converted (especially the small starch granules which have a higher gelatinization temperature), a dextrinization rest is held at 158 - 162 *F (70 - 72 *C). At this temperature the beta amylase is quickly deactivated and only the alpha amylase works on the starches. The rest is held until the mash is iodine negative (no starch or long dextrines in the wort). Narziss [Narziss, 2005] and Fix [Fix, 1999] suggest, that a rest at 158 - 162 *F (70 - 72 *C) benefits head retention and body of the beer though glycoproteides that are extracted from the malt but not degraded by enzymatic activity. Because of that Narziss suggests holding this rest up to 60 min. After that rest a mash-out is performed at 167-173F (75-78 C). The temperature should not be higher as this would deactivate all the alpha amylase activity and some alpha amylase activity is still needed during lautering to convert any rouge starches, that might be liberated during sparging, on their way to the kettle.

The length as well as the temperature of the maltose rest determines the fermentability of the wort. Shorter rests and/or higher temperatures will result in a less fermentable wort as the beta amylase gets less time for maltose production.

The steps for the water infusions and decoctions necessary for this mash have already been covered with the other mash schedule examples. This mash schedule can also be done w/o the use of decoctions through hot water infusions or direct heat to the mash. The latter has become standard practice in most German breweries.

Videos

There is a 3 part video series on YouTube that demonstrates decoction mashing using the enhanced double decoction:

Part 1 - Part 2 - Part 3

This was the initial transcript for the videos. I ended up omitting some of it: Decoction Mashing Video - Transcript

Sources

[Narziss, 2005] Prof. Dr. agr. Ludwig Narziss, Prof. Dr.-Ing. habil. Werner Back, Technische Universitaet Muenchen (Fakultaet fuer Brauwesen, Weihenstephan), Abriss der Bierbrauerei. WILEY-VCH Verlags GmbH Weinheim Germany, 2005
[Fix, 1999] George J. Fix Ph.D, Principles of Brewing Science, Brewers Publications, Boulder CO, 1999