German Brewing between 1850 and 1900: Fermentation and Beer

From German brewing and more
Revision as of 15:12, 28 February 2009 by Kaiser (Talk | contribs) (The bottom fermentation)

Jump to: navigation, search

This second article about German Brewing in the later half of the 19th century covers the fermentation process and select beer styles as outlined in "Chemie fuer Laien" (1860). The first article (German Brewing between 1850 and 1900 : Malting and Wort Production) covered the brewing process from steeping the malt to cooling the wort.

Fermentation

The production of a good beer depends very much on the chemical process which we call fermentation. As a result the brewer has to give it his utmost attention. If it runs badly the beer will be bad even if all other processes ran well and were controlled with care. But if it runs well it is possible to compensate for small mistakes made up to this point. Except if the wort got sour because in this case the 2nd fermentation already happened before the 1st one started.

The beer fermentation is divided into two groups: top fermentation and bottom fermentation. Both types convert the sugar into alcohol and carbonic acid. But in beer this conversion should not be run until completion because one would like to have not only alcohol but also substance in the beer. The alcohol makes the beer invigorating, the carbonic acid gives it the refreshing taste, the unconverted sugar makes it nutritious and the hops give it the spice. The fermentation should not destroy these properties nor should it affect them negatively and thats why it is so important to control it well. Today we know that there are fermentable and unfermentable carbohydrates in the wort and that the yeast can consume only the fermentable ones anyway

Besides the mentioned primary purpose should the fermentation facilitate the precipitation of a substantial amount of the protein. The more it is removed the more stable the beer will be. But the beer should never become void of any fermentation substrate, because unlike vine it is not a fully fermented beverage. If it would become that it would stop being pleasantly drinkable. The carbon dioxide, which is formed through fermentation, is substantial condition for the pleasant taste. It is not present in vine since there the fermentation is complete and all the carbon dioxide has escaped. It sounds as if the author was not aware that carbon dioxide is trapped in the beer if the vessel is closed and that it can retain carbonation even after complete fermentation. To prevent such a staling of the beer the beer needs to retain enough fermentation substrate such that it can slowly ferment throughout its existence. This is the same with Champagne.

The temperature has a major effect on the course of the fermentation. At a temperature of 15 or more degrees (C) is the fermentation turbulent, quick and very active. At 7 C or less the fermentation is quiet and much slower. The yeas rises to the top during the faster fermentation at higher temperatures. The carbon dioxide bubbles lift the yeast to the top this is why this process is called top fermentation (Obergaerung). At lower temperatures less carbon dioxide is produced and the bubbles are too small to carry anything else but themselves and the yeast falls to the bottom. This is why this process is called bottom fermentation (Untergaerung).

Top yeast causes top fermentation and bottom yeast causes bottom fermentation. But with the right temperature the type of the yeast can be changed. If one takes the yeast rich foam of a top fermentation and adds it to wort and lets this stand at a temperature of 5C then the yeast is doing a bottom fermentation. Only little rises to the top. If one uses this yeast for fermenting fresh wort at low temperatures again then the former top yeast will completely transform into bottom yeast. Likewise can one create top fermentation and top yeas from bottom yeast by fermentation at 15 or more degrees C. This is an interesting observation. We know now that ale yeast is not going to change into lager yeas just based on the temperature but what may have happened is that the yeast that was used was not a pure ale or lager strain. It was a mix of strains and fermentation at lower temperatures benefited the lager type cells and fermentation at higher temperatures benefited the ale type cells.

Light beers, which aren't expected to last a long time, are fermented with top yeast. It finishes the fermentation quickly, converts lots of the sugar in alcohol and produces lots of carbon dioxide (the reason for the strong foaming of the Weissbiere). But because the fermentation is done at higher temperatures they tend to get sour very easily and the protein is not precipticated as completely. Such beers are not stable and need to be consumed quickly.

For beers whose small amount of sugar should not ferment completely, like the Bavarian and other lager beers, a the bottom fermentation is chosen. In this case the process is a slow one and the beers can be consumed months after being brewed. The protein settles out with the yeast and during their shelf life these beers will get better with every day.

For top and bottom the process of fermentation is divided into three different phases. During the first, which starts after the addition of the yeast, sugar is converted into alcohol and new yeast is formed from the nitrogen compounds. The temperature of the fermenting substance rises. This part is called the rapid or wild fermentation.

The second phase is the secondary fermentation (Nachgaerung). And while the conversion of the sugar still continues it is much slower and most of the yeas formed during the first phase settles out. The turbid beer clears up. The third phase is called the impalpable. It happens after the settling of the yeast and clarification. If that was complete the continued fermentation and yeast growth is so slow that there is still the fermentation of sugar and formation of carbon dioxide but the settling of the yeast is so slight that it is a mere haze on the side of the bottle on which it was laying. A haze that the maid pretends not being able to remove but which needs to be removed if one doesn't want to drink sour beer as it would immediately start the second stage of fermentation in the beer that is filled into that bottle next. Second fermentation means in this context the souring of the beer as this as seen as yet another fermentation stage that happens to the beer.

The bottom fermentation

Of significant importance is the locality in which the fermentation takes place. It has to be as deep as possible in the ground or surrounded by thick walls such that the outside temperature has no effect on the fermentation room. It needs to be vented but only at night as the temperatures during the day fluctuate too much and it is important to have a constant temperature. This is easiest during the winter and during fall and spring this is only possible through artificial means like sufficient ice reserves.

The rooms have to be kept clean with the utmost care. Any foul smell is dangerous for the wort. It either influences the beer or lays the seed for spoilage.

The vessels are usually made from wood and require an even greater cleanliness that the mash and cooling vessels as they only hold the wort for a few hours whereas the fermentation vats hold the beer for ten to fourteen days. These vats are oftentimes made quite large and can hold up to three thousand liter. In Bavaria they have for the beer production during the winter even ones that can hold ten thousand liter. But they can only be used during the winter as the fermentation rises the temperature significantly in such large volumes.

Some brewers mix some of the wort from the cool ship with the yeast and then add this to the wort in the vat. Others take some wort, add it to the yeast and let this come to fermentation before they add it to the remaining wort. But every one swears that their method is the correct one and that large losses are eminent if it is done differently.

It is clear that the complete distribution of the yeast in the wort is the first requirement and this distribution is best achieved if the yeas is first mixed with some wort until it is thin. Then this is added to the main batch and stirred. This is repeated multiple times during the first 12 hours.

The amount of yeast that should be pitched also depends on the view of the brewer. About 1/2 to 2/3 percent of the batch volume are taken. Too much yeast is disadvantageous because it can lead a displeasing taste to the beer, one that is similar to home baked bread. In addition to that, the longer the beer should last the less yeast should be used. The condition of the yeast and the fermentation temperature also need to be considered.

During the first 12 hours the surface starts to get covered by a light white foam. These are small carbon dioxide bubbles which are covered with a thin layer of wort. This happens first close to the walls and progresses then towards the center. Most of the bubbles stay together but some burst and release their carbon dioxide which gives the peculiar stinging smell and that prickling in the nose. First only when one leans into the vat.

Later when more and more carbon dioxide is produced it will spill out of the vat and onto the floor and cover it such that a dog lost in the fermentation rooms immediately falls over and dies of asphyxiation.

After three to four days the rising foam forms a foamy mass (the Kraeusen) which starts to subside as the fermentation slows. All that is left is a thin brown cover which mostly consists of the bitter resins of the hops. There is only little yeast in that layer. The yeas falls to the bottom which clears the beer more and more.

The beer is now called Jungbier (young beer) or Gruenbier (green beer) and its clearing indicates that it is ready to be put into the lagering barels where it will continue with the much slower and longer secondary fermentation which is necessary to give the beer is drinkability. To test if a beer is ready to be racked to the lagering vessels a sample can be brought into a warm place. If it clears quickly and only little yeast settles out in flocks the beer is ready. This is the point in fermentation when the yeast starts to flocculate because all or most of the maltose has been consumed.

The wort has a specific consistency. The sugar and dextrins made it heavier than water. But after the fermentation process it is much lighter. This dillution is called "Attenuation" in the new technical chemistry and it results from the fermentation having converted some of the sugar to alcohol.

The weight of the wort is determined with an instrument called the Saccharometer (old wort for hydrometer). The depth with which it sinks into the wort indicates how much sugar and dextrins this wort has. Let's assume that the wort had a weight of 13 percent (This is pretty much equal to 13 Plato). After the eight to ten day main fermentation it shows only 6 percent. One would say that half of the sugar has been converted into alcohol. But this dilution can also be higher or lower. It depends very much on the way that the malt was kilned. Luftmalz (air malt) gives more sugar and thus more alcohol than heavily kilned brown malt which will not give an as "spirit rich" beer. It should be noted that it seems that they did not make a distinction between true and apparent extract of the beer. Since the 6 Plato were read from the beer with a hydrometer it means that this is apparent extract and the real extract or sugar content is still higher than 6 percent.

It is difficult to say how much time the main fermentation will take as much of this depends on the temperature and the quality of the yeast. But the stage to which it has progressed greatly influences the secondary fermentation. The more complete the primary fermentation was the slower the secondary fermentation will be. The brewer uses this fact to either produce a beer that can be consumed quickly but is less stable or a beer that takes longer to be drinkable but more shelf stable.

When the beer is transferred the layer covering it needs to be removed. This is understood as it would give the beer a harsh bitter taste. The beer also needs to be clear and free of yeast. The last bit, that was standing over the yeast, is allowed to settle and added later to the lagering casks.

The fermentation produces new yeast which is a fungus that grows rapidly where there is food and the nitrogen rich compounds of the malt are especially suited. The old non-viable yeast settles first. The newly formed and most viable yeas settles next and after that a thin liquid yeast settles which is useless.

Since the yeast is of such importance the brewers don't grow it new for each batch. They don't discard the sediment but remove the thin slurry on the top and then scape off the good yeast without getting too much of the old and useless bottom layer. This requires some skill and is done with large scrapers.

Once the yeast as been collected and is stored in fresh water the vat is cleaned with water and large brooms using the utmost care to clean especially the corners.

When the lager beer is transfered to the lagering casks they are generally filled completely and they are closed (Verspunded) only once the secondary fermentation has ceased completely. The longer that secondary fermentation took the longer the beer needs needs to be kept closed up now. Such a beer has also the best stability and with longer storage it becomes stronger and better.

It seems that at the time when this book was written the concept of the controlled venting of the head pressure in the casks was not used yet. The amount of carbonation was only controlled though the amount of residual sugar at the time at which the cask was bunged. And based on the description this happened fairly late which leads me to believe that the lager beers of 1860 were not well carbonated. The Bavarian Brewing Museum however showed devices that were used to control the head pressure in the lagering vessels.

Top Fermentation

When it comes to top fermented beers the author lists a lot of different techniques. Interesting was that even some "Lagerbier" was top fermented, especially in northern Germany. The fermentation temperature was above 15C but the beer was filed into casks and lagered like the bottom fermented beer. This is basially how Alt and Koelsch are brewed.

It also talks about summer beer and how it has to be top fermented because the low temperatures for bottom fermentation cannot be achieved during the summer. These beers are generally consumed shortly after the primary fermentation is over and contain much more carbonation. They also have the tendency to go sour pretty quickly. The Bavarian wheat beer (Weissbier) for example is even brewed without hops