Difference between revisions of "Imperator"
(→Grist) |
|||
Line 26: | Line 26: | ||
= Grist = | = Grist = | ||
+ | * 15% Weyermann Bohemian Pils | ||
+ | * 75% Weyermann Munich Type II (Dark Munich) | ||
+ | * 2% Weyermann Cara Aroma | ||
+ | * 3% Weyermann CaraMunich II | ||
+ | * 2% Weyermann CaraMunich III | ||
+ | |||
+ | The Pilsner malt, can be substituted with regular German Pils malt, was added as an insurance against excessive enzyme degradation during the decoction process. The CaraAroma could be omitted if not available. To increase the complexity of this beer, I like to layer different crystal malts. In this case Weyermann's CaraMunich II and III. | ||
+ | |||
+ | Use your batch size and brewhouse efficiency to determine the grain amounts necessary to reach a post boil gravity of 18.5 Plato (~1.074 SG) | ||
=Hops= | =Hops= |
Revision as of 17:44, 27 June 2008
The Imperator Doppelbock is a classic German Doppelbock that is comparable to Spaten's Optimator without trying to be a clone. It is of a dark mahagony color without roasted notes in aroma or taste. Though intended to be complex in flavor it is also very drinkable. Mostly due to its starting extract of 18.5 Plato which puts it in the lower end of the range for Doppelbocks, but most commercial examples are fairly close to that range. This beer will take some time. After lagering it for 2-3 months, it should be aged for at least another 2-3 months for the dark fruit notes to come out.
The traditional season for Doppelbock is Lent, which is the time from Ashwednesday to Good Friday. Ashwednesday is generally towards the end of February. This means that the best time to brew this beer is September. This will give it 6 month to be ready for its season.
Water
for brewers who build their own water
This water treatment is for 34.5 l reverse osmosis water:
- 0.90g Table Salt (NaCl)
- 0.65g Epsom Salt (MgSO47H2O)
- 2.00g Baking Soda (NaHCO3)
- 3.80g Chalk (CaCO3)
The resulting water should have a profile of: 48 mg/l Ca, 3 mg/l Mg, 30 mg/l Na, 9 mg/l SO4, 20 mg/l Cl, 131 mg/l HCO3
While it is not important to match this water profile exactly, the following guidelines should be followed:
- residual alkalinity should be around 4 dH (degree German Hardness) or 80 mg/l HCO3
- the sulphates should be low since this beer doesn't emphasize the hops
- Calcium should be at least 40 - 50 mg/l since it is a yeast nutrient
Grist
- 15% Weyermann Bohemian Pils
- 75% Weyermann Munich Type II (Dark Munich)
- 2% Weyermann Cara Aroma
- 3% Weyermann CaraMunich II
- 2% Weyermann CaraMunich III
The Pilsner malt, can be substituted with regular German Pils malt, was added as an insurance against excessive enzyme degradation during the decoction process. The CaraAroma could be omitted if not available. To increase the complexity of this beer, I like to layer different crystal malts. In this case Weyermann's CaraMunich II and III.
Use your batch size and brewhouse efficiency to determine the grain amounts necessary to reach a post boil gravity of 18.5 Plato (~1.074 SG)